Breathable Bumper – Completed
Originally uploaded by umgeekgirl
I modeled this after the One Step Ahead Breathable Bumper.
Materials:
* 72″x24″ double nylon netting
* 72″x8″ fabric (2 pieces) – top & bottom
* 5.5″x72″ fabric (1 piece then cut in half) – sides
*12″ velcro strips – 4 sets of hook & loop
Step 1: Iron all pieces – bringing sides to center and then folding in half
Step 2: Place nylon netting within the fold of the top and bottom pieces
Step 3: Sew nylon in place by stitching 1/4″ from open edge and on folded edge
Step 4: Cut skinny side pieces in half and place nylon netting along center fold
Step 5: Fold up edges to create a neat corner
Step 6: Sew up along all edges of fabric side pieces (1/4″ from edge)
Before velcro is placed. (above)
Step 7: Sew on velcro. Placing loop hook strip closest to corner and then loop strip after it
All done! And attached to bars.
Leave a Reply